Assignment 7
Problem 11-11 – Barberry, Inc
Problem 11-12 – Landers Company
Problem 11-13 – Topaz Company
Problem 12-15 – Comparative Data
Problem 12-16 – MacIntyre Fabrications
Examples: P11-10, P11-14, P11-15, P11A-12, P12-14, P12-18, P12-20
Problem 11-11 – Barberry, Inc
PROBLEM 11-11 Basic Variance Analysis [LO1, LO2, LO3]
Barberry, Inc., manufactures a product called Fruta. The company uses a standard cost system and
has established the following standards for one unit of Fruta:
Standard Quantity
Standard price or Rate
Standard Cost
Direct materials
1.5 pounds
$6.00 per pound
$9.00
Direct labor
0.6 hours
$12 per hour
7.20
Variable manufacturing overhead
0.6 hours
$2.50 per hour
1.50
$17.70
During June, the company recorded this activity related to production of Fruta:
a. The company produced 3,000 units during June.
b. A total of 8,000 pounds of material were purchased at a cost of $46,000.
c. There was no beginning inventory of materials; however, at the end of the month, 2,000 pounds of material remained in ending inventory.
d. The company employs 10 persons to work on the production of Fruta. During June, they worked an average of 160 hours at an average rate of $12.50 per hour.
e. Variable manufacturing overhead is assigned to Fruta on the basis of direct labor-hours. Variable manufacturing overhead costs during June totaled $3,600.
The company’s management is anxious to determine the efficiency of Fruta production activities.
Required:
1. For direct materials:
a. Compute the price and quantity variances.
b. The materials were purchased from a new supplier who is anxious to enter into a long term purchase contract. Would you recommend that the company sign the contract?
Explain.
2. For labor employed in the production of Fruta:
a. Compute the rate and efficiency variances.
b. In the past, the 10 persons employed in the production of Fruta consisted of 4 senior workers and 6 assistants. During June, the company experimented with 5 senior workers and 5 assistants. Would you recommend that the new labor mix be continued? Explain.
3. Compute the variable overhead rate and efficiency variances. What relation can you see between this efficiency variance and the labor efficiency variance?
Problem 11-12 – Landers Company
PROBLEM 11–12 Basic Variance Analysis; the Impact of Variances on Unit Costs [LO1, LO2, LO3]
Landers Company manufactures a number of products. The standards relating to one of these products are shown below, along with actual cost data for May.
Standard Actual
Cost per Cost
Unit per Unit
Direct materials:
Standard: 1.80 feet at $3.00 per foot . . . . . . . . . . . . . $ 5.40
Actual: 1.75 feet at $3.20 per foot . . . . . . . . . . . . . . . $ 5.60
Direct labor:
Standard: 0.90 hours at $18.00 per hour . . . . . . . . . 16.20
Actual: 0.95 hours at $17.40 per hour . . . . . . . . . . . . 16.53
Variable overhead:
Standard: 0.90 hours at $5.00 per hour . . . . . . . . . . 4.50
Actual: 0.95 hours at $4.60 per hour . . . . . . . . . . . . . 4.37
Total cost per unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.10 $26.50
Excess of actual cost over standard cost per unit . . . . . $0.40
The production superintendent was pleased when he saw this report and commented: “This $0.40 excess cost is well within the 2 percent limit management has set for acceptable variances.
It’s obvious that there’s not much to worry about with this product.”
Actual production for the month was 12,000 units. Variable overhead cost is assigned to products on the basis of direct labor-hours. There were no beginning or ending inventories of materials.
Required:
1. Compute the following variances for May:
a. Materials price and quantity variances.
b. Labor rate and efficiency variances.
c. Variable overhead rate and efficiency variances.
2. How much of the $0.40 excess unit cost is traceable to each of the variances computed in (1) above.
3. How much of the $0.40 excess unit cost is traceable to apparent inefficient use of labor time?
4. Do you agree that the excess unit cost is not of concern?
Problem 11-13 – Topaz Company
PROBLEM 11–13 Materials and Labor Variances; Computations from Incomplete Data [LO1, LO2]
Topaz Company makes one product and has set the following standards for materials and labor:
Direct Direct
Materials Labor
Standard quantity or hours per unit . . . . ? pounds 2.5 hours
Standard price or rate . . . . . . . . . . . . . . ? per pound $9.00 per hour
Standard cost per unit . . . . . . . . . . . . . . ? $22.50
During the past month, the company purchased 6,000 pounds of direct materials at a cost of $16,500. All of this material was used in the production of 1,400 units of product. Direct labor cost totaled $28,500 for the month. The following variances have been computed:
Materials quantity variance . . . . . . . . . . . . . . . $1,200 U
Total materials spending variance . . . . . . . . . . $300 F
Labor efficiency variance . . . . . . . . . . . . . . . . . $4,500 F
Required:
1. For direct materials:
a. Compute the standard price per pound for materials.
b. Compute the standard quantity allowed for materials for the month’s production.
c. Compute the standard quantity of materials allowed per unit of product.
2. For direct labor:
a. Compute the actual direct labor cost per hour for the month.
b. Compute the labor rate variance.
(Hint: In completing the problem, it may be helpful to move from known to unknown data either by using the variance formulas or by using the columnar format shown in Exhibits 10–5 and 10–6 .)
Problem 12-15 – Comparative Data
PROBLEM 12–15 Comparison of Performance Using Return on Investment (ROI) [LO1]
Comparative data on three companies in the same service industry are given below:
Company
A B C
Sales . . . . . . . . . . . . . . . . . . . . . . . . $4,000,000 $1,500,000 $ ?
Net operating income . . . . . . . . . . . . $ 560,000 $ 210,000 $ ?
Average operating assets . . . . . . . . . $2,000,000 ? $3,000,000
Margin . . . . . . . . . . . . . . . . . . . . . . . ? ? 3.5%
Turnover . . . . . . . . . . . . . . . . . . . . . . ? ? 2
Return on investment (ROI) . . . . . . . ? 7% ?
Required:
1. What advantages are there to breaking down the ROI computation into two separate elements, margin and turnover?
2. Fill in the missing information above, and comment on the relative performance of the three companies in as much detail as the data permit. Make specific recommendations about how to improve the ROI.
Problem 12-16 – MacIntyre Fabrications
PROBLEM 12–16 Measures of Internal Business Process Performance [LO3]
MacIntyre Fabrications, Ltd., of Aberdeen, Scotland, has recently begun a continuous improvement
campaign in conjunction with a move toward Lean Production. Management has developed new performance measures as part of this campaign. The following operating data have been gathered over the last four months:
Month
1 2 3 4
Throughput time . . . . . . . . . . . . . . . . . . . . . . ? ? ? ?
Manufacturing cycle efficiency . . . . . . . . . . . ? ? ? ?
Delivery cycle time . . . . . . . . . . . . . . . . . . . . ? ? ? ?
Percentage of on-time deliveries . . . . . . . . . 72% 73% 78% 85%
Total sales (units) . . . . . . . . . . . . . . . . . . . . . 10,540 10,570 10,550 10,490
Management would like to know the company’s throughput time, manufacturing cycle efficiency, and delivery cycle time. The data to compute these measures have been gathered and appear below:
Month
1 2 3 4
Move time per unit, in days . . . . . . . . . . . . 0.5 0.5 0.4 0.5
Process time per unit, in days . . . . . . . . . . 0.6 0.5 0.5 0.4
Wait time per order before start of
production, in days . . . . . . . . . . . . . . . . 9.6 8.7 5.3 4.7
Queue time per unit, in days . . . . . . . . . . . 3.6 3.6 2.6 1.7
Inspection time per unit, in days . . . . . . . . 0.7 0.7 0.4 0.3
Required:
1. For each month, compute the following:
a. The throughput time.
b. The manufacturing cycle efficiency (MCE).
c. The delivery cycle time.
2. Using the performance measures given in the problem and those you computed in (1) above, identify whether the trend over the four months is generally favorable, generally unfavorable, or mixed. What areas apparently require improvement and how might they be improved?
3. Refer to the move time, process time, and so forth, given for month 4.
a. Assume that in month 5 the move time, process time, and so forth, are the same as for month 4, except that through the implementation of Lean Production, the company is able to completely eliminate the queue time during production. Compute the new throughput time and MCE.
b. Assume that in month 6 the move time, process time, and so forth, are the same as for month 4, except that the company is able to completely eliminate both the queue time during production and the inspection time. Compute the new throughput time and MCE
What Students Are Saying About Us
.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐"Honestly, I was afraid to send my paper to you, but you proved you are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"
.......... Customer ID: 11***| Rating: ⭐⭐⭐⭐⭐
"This company is the best there is. They saved me so many times, I cannot even keep count. Now I recommend it to all my friends, and none of them have complained about it. The writers here are excellent."
"Order a custom Paper on Similar Assignment at essayfount.com! No Plagiarism! Enjoy 20% Discount!"
