Question 2:
A modified NRZ code known as enhanced-NRZ (E-NRZ) is sometimes used for high-density magnetic tape recording. E-NRZ encoding entails separating the NRZ-L data stream into 7-bit words; inverting bits 2, 3, 6, and 7; and adding one parity bit to each word. The parity bit is chosen to make the total number of 1s in the 8-bit word an odd count. What are the advantages of ENRZ over NRZ-L? Disadvantages?
Question 3:
Two companies consider pooling resources to perform a joint venture. The CEO of the first company meets with his legal team, and the legal team consults a number of middle managers in the proposed product area. Meanwhile, the CEO of the first company sends an email to the CEO of the second company to offer a couple suggestions concerning the joint venture. Does this scenario follow the OSI model? Explain.
Question 4:What is the channel capacity for a teleprinter channel with a 300-Hz bandwidth and a signal-to-noise ratio of 3 dB, where the noise is white thermal noise?
Question 5:Can you transmit a video signal over twisted pair wire? Explain. Be sure to consider multiple scenarios.
Question 6:Twenty-four voice signals are to be multiplexed and transmitted over twisted pair. What is the bandwidth required (in bps) if synchronous time division multiplexing is used, if we use the standard analog to digital sampling rate, and if each sample is converted into an 8-bit value?
Rationale
To demonstrate your understanding of:
Communication and network Architecture
Data and signals
Conducted and wireless media
Effective Communication types and standard
Error Detection and Control
Marking criteriaAll questions are equal value.
Questions
STANDARDS
 
FL (
PS (50% – 64%)
CR (65% – 74%)
DI (75% – 84%)
HD (>84%)
Q1
Major omissions in the explanation and Unsubstantiated/ invalid conclusions.
The answer is correct but not complete and adequate explanation is not fully provided. No references are used. There are grammatical errors and spelling mistakes.
The answer is correct, but the explanation is not complete. Very few references are used and not formatted appropriately.
Answer is correct and a detailed explanation is provided. References are used. No or only a few grammatical or spelling mistakes.
Answer is correct, and complete. Comprehensive explanation is provided with appropriate example. Appropriate reference style is used. No grammatical or spelling mistake.
Q2
Major omissions in the description of the advantages and disadvantages of ENRZ over NRZ-L.
The answer is correct, but the explanation is not complete; showing a lack of understanding of ENRZ and NRZ-L.
The answer is correct, but the explanation is not complete.
A comprehensive description of the advantages and disadvantages of ENRZ over NRZ-L is provided.
A comprehensive description of the advantages and disadvantages of ENRZ over NRZ-L is provided; Demonstrated an in-depth understanding of ENRZ and NRZ-L.
Q3
Major omissions in the description and the basic understanding of the scenario and OSI.
The answer is correct, but the explanation is not complete.
The answer is correct, but the link between the scenario and OSI is not explained well.
A comprehensive explanation of the OSI model, and be able to show the link between the scenario and OSI.
A comprehensive description of the OSI model; Demonstrated an in-depth understanding of scenario and the reason behind it.
Q4 – Q 5
Major misunderstanding of the technical issues outlined.
The answer for the technical issues outlined is correct, but the explanation is incomplete.
Answer is correct, and complete.
Answer is correct, and complete. Comprehensive explanation is provided with appropriate examples.
Be able to show a perfect understanding of the technical issues outlined.
Q6
A total lack of understanding of voice signals transmission; synchronous time division multiplexing and analog to digital sampling rate.
Answer is correct, and complete but there is lack of explanation regarding the voice signals transmission and synchronous time division multiplexing.
Answer is correct, and complete with reasonable explanation regarding the voice signals transmission and synchronous time division multiplexing.
Answer is correct, and complete. Explanation is provided to the issue of voice signals transmission; synchronous time division multiplexing and analog to digital sampling rate.
Answer is correct, and complete. Be able to demonstrate an in-depth understanding of voice signals transmission and synchronous time division multiplexing.
Presentation
You are required to write the answers in a word document and submit it via Turnitin. Use Times New Roman/Palatino Linotype/Calibri/Cambria/Arial fonts using 10 to 12 font size. You can also submit your document in pdf format as well.
Your answers to the questions should be precise but complete and informative. Below is a guideline about expected length of the answers in terms of the number of words:
(Question 1: 100- 200 words for each part; Questions 2 – 6: max 400 words)
APA reference style should be used in the assignment. APA referencing guide can be foundin http://www.csu.edu.au/division/studserv/my-studies/learning/pdfs/apa.pdf
 


What Students Are Saying About Us

.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐
"Honestly, I was afraid to send my paper to you, but you proved you are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"

.......... Customer ID: 11***| Rating: ⭐⭐⭐⭐⭐
"This company is the best there is. They saved me so many times, I cannot even keep count. Now I recommend it to all my friends, and none of them have complained about it. The writers here are excellent."


"Order a custom Paper on Similar Assignment at essayfount.com! No Plagiarism! Enjoy 20% Discount!"