working on a case study need a sample draft to study fromOnce you have completed the video, answer the questions listed on the information page for each video.A transcript of each video is supplied to the right of the video play box.Each response should be 1 page (approx. 310 words) and use detailed info from the video.No citations necessary.https://fod.infobase.com/PortalPlaylists.aspx?wID=…

Contractual Procedures and Estimation (CIVL 0026.1) – Fall – 20 – CW (Assignment 1) – A – QP MEC_AMO_TEM_035_02 Page 1 of 13 Instructions to Student General Instructions/information for the students for completing the assignment  Answer all questions.  Deadline of submission: 25/11/2020; 23:59  The marks received on the assignment will be scaled down to the actual weightage of the assignment which is 50 marks  Formative feedback on the complete assignment draft will be provided if the draft is submitted at least 10 days before the final submission date.  Feedback after final evaluation will be provided by 03/12/2020 Module Learning Outcomes The following LOs are achieved by the student by completing the assignment successfully. 1. Give reasoned advice on managing tendering process and presenting reports. Assignment Objective This study aims to develop the students’ understanding of tendering procedures in construction industry. Assignment Tasks 1) Task 1 (proposal) [100 marks allocated for proposal shall be scaled to 10 marks] Submit a work proposal for this assignment on or before 28/10/2020 (23:59) which must include:  Aim of coursework: (20 marks) What is the task given and what shall are you required to do in this assignment?  Coursework description: (60 marks) IN SEMESTER (INDIVIDUAL) ASSIGNMENT Module Code: CIVL 0026.1 Module Name: Contractual Procedures and Estimation Level: 2 Max. Marks: 100 Contractual Procedures and Estimation (CIVL 0026.1) – Fall – 20 – CW (Assignment 1) – A – QP MEC_AMO_TEM_035_02 Page 2 of 13 Short paragraph (one or two points are enough for each headings) to summarize the expected outputs of the assignment. (Analysis, calculations, discussion, research on.., etc). Time Plan: Prepare the time-plan in days. (20 marks) Student has to use a bar chart mentioning the name of activities with start date and end date with help of any software. The work proposal must be submitted in a word file through the link available in Moodle. Note: Maximum 300 words are enough for proposal. 2) Task 2 [90 Marks] Bryan Consultant Company decide to construct four storied apartment building in Al Hail. The building consist on one majlis, one hall, two bed room, two toilets, a kitchen and a dining. The Consultant Company deals with inception to completion of the project. Bryan Consultant Company appoints you as senior cost Engineer to prepare the PRIME DOCUMENT as per the conditions of contract “Sultanate of Oman Standard Document for Building and Civil Engineering Works (fourth edition), September 1999 by considering the following requirements. So that you need to prepare the PRIME DOCUMENT forming the part of tender document. a) Suggest the principal methods of choosing the best contractor to obtain the best price for the construction four storied apartment building and suggest the best tender which suite to for the construction. b) Write the procedure followed for the best tender during the preparation stage, evaluation stage and award for the best tender for construction of four storied apartment building. c) Explain the document to be submitted along with the tender document d) Suggest the e-tendering process followed in Sultanate of Oman with the pros and cons. e) As the part of tender document prepare the Instruction to tenderers and prepare the form of tender to the above scenario. Rules & Regulations:  All resources should be cited using CU Harvard style. Contractual Procedures and Estimation (CIVL 0026.1) – Fall – 20 – CW (Assignment 1) – A – QP MEC_AMO_TEM_035_02 Page 3 of 13  The final assignment must have a Title page, Table of Contents, References/ bibliography using CU Harvard Style and page numbers.  Title Page must have Assignment Name, Module name, Session, your name, ID, and the name of the faculty.  Softcopy in word format is to be submitted through Turnitin link on Moodle.  Date of submission of proposal is 28-10-2020 Guidelines:  Assignment must be computer typed.  Font – Times New Roman  Font – Style – Regular  Font – Size – 12  Heading should be with Font Size 14, Bold, Capital and Underline.  Explain with suitable diagrams wherever required. Diagrams must be drawn using suitable software or by pencil.  Each student has to do the assignment individually / Students have to do the assignment collaboratively and each student should write a brief reflection on their contribution and learnings from group work.  You can refer books in E-Library or use internet resource. But you should not cut and paste material from internet nor provide photocopied material from books. The assignment answers should be in your own words after understanding the matter from the above resources. Report Sections The Report should contain a 1200 to 1500 words maximum (introduction, Main body of report & Conclusions and recommendations) with the following sections:  Cover Page  Table of contents  Introduction  Main body of report  Conclusions and recommendations  References / Bibliography The report should start from the ‘cover page’ to the ‘references’ with the following sections: 1. Cover Page 2. Table of contents:  ‘Table of Contents’ must be in bold upper case size 14 points font in the middle of page (centered) Contractual Procedures and Estimation (CIVL 0026.1) – Fall – 20 – CW (Assignment 1) – A – QP MEC_AMO_TEM_035_02 Page 4 of 13  ‘List of Figures’, ‘List of Tables’ must be in the upper case without bold and use Roman numerals to number the pages.  All chapter topics should be written in upper case without bold.  Subtopics written in each chapter should be numbered using Arabic numerals and indented one tab. 3. Introduction (250 words) This section is the background of the report content. It summarizes the overview of the topic and how the report is organized. 4. Main body of report (1000 words)  Describe the context of the case and present the breakdown summary of the data gathered for the Present findings in an organized manner supported by literature.  Explain the techniques engaged. The following are the details in writing of the body of the report:  The headings are informative and descriptive.  Discuss the conceptual framework of the case study  Expound or elaborate the concept by presenting sub –topics relevant to the main topic. 5. Conclusions and recommendations (250 words) Every report should include a concluding statement regarding the subject matter of the study. State how this topic information has developed your knowledge. It can state also how this experience has enhanced your writing skills during the research process. 6. References (Minimum 10 references) Write the list of all the sources of information you have consulted incorporated in the report following the right format of listing them using the Harvard style referencing format of listing. All references listed can come from websites, journals, reference books magazines etc. Minimum 10 citations are mandatory in the report (two source for e-library). Assessment Evaluation Criteria Contractual Procedures and Estimation (CIVL 0026.1) – Fall – 20 – CW (Assignment 1) – A – QP MEC_AMO_TEM_035_02 Page 5 of 13 Classification And % Range Reflection and critical analysis. Knowledge and Understanding/ Application of Theory Evidence of Reading Referencing and Bibliography Presentation, Grammar and Spelling Outstanding 91-100 Highly competent analytical skills and reflective practice, demonstrating personal learning and growth, insight into required professional values and principles and professional development planning. Extensive knowledge and depth of understanding of principles and concepts and /or outstanding application of theory in practice. Evidence of reading an extensive range of educational literature/research and where applicable workplace strategies, policies and procedures. Accurate referencing and bibliography correctly using appropriate referencing style Excellent presentation, logically structured, using correct grammar and spelling, excellent crossreferencing and links to supporting evidence Excellent 81–90 Strong analytical skills and reflective practice used, demonstrating personal learning and growth, insight into required professional values, principles and competencies and professional development planning. Excellent knowledge and understanding of principles and concepts and /or excellent knowledge and understanding of the application of theory in practice Evidence of reading a wide range of educational literature/research and where applicable, workplace strategies, policies and procedures. Appropriate referencing and bibliography correctly using appropriate referencing style Good presentation, competently structured, using correct grammar and spelling, clear and easy to use links to supporting evidence Very Good Quality 71-80 Good use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required professional values, principles and competencies and professional development planning. Good knowledge or key principles and concepts and/or good knowledge of the application of theory in practice Evidence of reading a good range of educational literature/research and where applicable workplace strategies, policies and procedures. Generally well referenced with correct use of the appropriate referencing style Reasonable presentation, completely structured, acceptable grammar and spelling, acceptable links to supporting evidence Good (Acceptable) 61-70 Acceptable use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required professional values, principles and competencies and professional development planning. Acceptable knowledge of key principles and concepts and/or knowledge of the application of theory in practice Evidence of reading an appropriate range of educational literature/research and where applicable, relevant workplace policies and procedures Adequate referencing. Generally accurate use of appropriate referencing style Adequate presentation and structure, acceptable grammar and spelling, adequate links to supporting evidence Adequate/ Satisfactory 51-60 Adequate use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required professional values, principles and competencies and professional development planning. Adequate knowledge of key principles and concepts and/or satisfactory evidence of the application of theory in practice. Evidence of minimal reading of educational literature/research and where applicable relevant workplace policies and procedures Adequate referencing. Appropriate referencing style used but may contain some inaccuracies. Weak presentation , satisfactory structure, grammar and spelling, links to supporting evidence Weak /Poor (all learning outcomes not adequately met) 0-50 Little use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required competencies and/or professional development planning. Professional values and principles not reflected in the submission. and/or Insufficient/no use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required competencies and professional development planning Little evidence of knowledge of key principles or concepts and/or little evidence of the application of theory in practice and/or No evidence of knowledge of key principles or concepts and/or no evidence of application of theory in practice Little or no evidence of reading outside of the course textbook and/or reference to relevant work place policies and procedures and/or No evidence of reading outside of the course textbook and/or reference to relevant workplace policies and procedures Little or no referencing, incorrect style, or very inaccurate use of appropriate referencing style Poor presentation, grammar and spelling, links to supporting evidence and/or Unacceptable presentation, grammar and spelling, structure is very poor, links to supporting evidence Contractual Procedures and Estimation (CIVL 0026.1) – Fall – 20 – CW (Assignment 1) – A – QP MEC_AMO_TEM_035_02 Page 6 of 13 Important Policies to be followed 1. Student Academic Integrity Policy*:  MEC upholds the spirit of academic integrity in all forms of academic work and any form of violation of academic integrity shall invite severe penalty. Any benefit obtained by indulging in the act of violation of academic integrity shall be cancelled.  MEC also reserves the right to notify the appropriate law enforcement authorities of any unlawful activity and to cooperate thereafter in any investigation of such activity.  Faculty can conduct a viva to investigate and ascertain that the work submitted is student’s own work as per the guidelines for the same. A student can be given a maximum of 2 chances to attend the viva in such cases. It is expected that the student attends the viva during the first chance itself unless due to extenuating circumstances. If the student does not attend the viva in spite of being given 2 chances and fails to submit valid reasons, he/she will be awarded a fail in the module and this shall be counted as a case of academic integrity violation. All cases of violation of academic integrity on the part of the student shall fall under any of the below mentioned categories: 1. Plagiarism 2. Malpractice 3. Ghost Writing 4. Collusion 5. Other cases If the student fails a module and has a proven case of academic integrity violation in this module, the student is required to re-register the module. This is applicable to first and second offence of academic integrity violation of plagiarism type 1.1. First Offence of Academic Integrity Violation: 1.1.1. Plagiarism a. If a student is caught first time in an act of academic integrity violation during his/her course of study in any assignment other than project work and if the type of violation is plagiarism, then the student will be allowed to re-submit the assignment once as per the period allowed for re submission However, a penalty Contractual Procedures and Estimation (CIVL 0026.1) – Fall – 20 – CW (Assignment 1) – A – QP MEC_AMO_TEM_035_02 Page 7 of 13 of deduction of 25% of the marks obtained for the resubmitted work will be imposed. b. Period of re-submission: The student will have to re-submit the work within one week (5 working days) from the date he or she is advised to re-submit. c. Re-submission of the work beyond the allowed period of resubmission will not be accepted and the assessment will be awarded a zero mark. d. If the re-submitted work (within the allowed period of resubmission) is also found to be plagiarized, then that assessment component will be awarded a zero mark. It shall also contribute to the total count of academic integrity violation for that student. e. If plagiarism is detected in UG Project work (Project 1, Project Planning and Project Design and Implementation), the above clauses do not apply, and the work will be summarily rejected. In these cases the student will be awarded a fail (F) grade and is required to reregister the module. 1.1.2. Malpractice / Ghostwriting / Collusion If a student is caught first time in an act academic integrity violation during his/her course of study for an assessment component irrespective of coursework or end semester and if the type of violation is Malpractice/Ghostwriting/Collusion, then the student shall fail the module. 1.2. Second Offence of Academic Integrity Violation: 1.2.1. Plagiarism a. If any student is caught second time in an act of academic integrity violation during his/her course of study and if the type of violation is plagiarism, then the student will not be allowed to resubmit the work, and s/he will directly be awarded zero for the work in which plagiarism is detected. b. The student shall also receive a warning of suspension in such cases. 1.2.2. Malpractice/Ghostwriting/Collusion a. If a student is caught a second time in an act academic integrity violation for an assessment component irrespective of coursework or end semester and if the type of violation is Malpractice/Ghostwriting/Collusion, then the student shall fail the module. b. The student shall also receive a warning of suspension in such cases. 1.3. Third Offence of Academic Integrity Violation: Contractual Procedures and Estimation (CIVL 0026.1) – Fall – 20 – CW (Assignment 1) – A – QP MEC_AMO_TEM_035_02 Page 8 of 13 a. If a student is caught a third time in an act of academic integrity violation for an assessment component irrespective of coursework or end semester then the student shall fail the module and also shall be suspended for one semester from the College, once the academic integrity violation case is confirmed by Institutional Assessment Review Committee. b. The student shall be suspended for the immediate subsequent semester and can register for modules only after having served the suspension period fully. This is also applicable for semesters offered in block mode. c. During the suspension period, the student shall have to mandatorily complete a course on academic integrity/writing before s/he can register for any modules. d. During the period of suspension, the student shall be allowed to attempt supplementary examinations if s/he is eligible for the same. S/he shall also be allowed access to all college facilities permitted for a regular student except for registering the modules. 1.4. Fourth Offence of Academic Integrity Violation: a. If a student is caught a fourth time in an act of academic integrity violation for an assessment component irrespective of coursework or end semester, the student shall fail the module and also shall be expelled from the College, once the case is confirmed by Institutional Assessment Review Committee. b. The student shall be expelled from the college and all access to the college facilities and premises shall cease to exist. The documents shall be released only after getting the NOC (No Objection Certificate) from Registration Office. c. `On termination, the student shall not be refunded any fees paid for the academic semester in which academic integrity violation was observed. 1.5. Other cases If a student commits an act of academic integrity violation as per the definition of “other cases” mentioned in the previous section or of a different nature, student’s case shall be forwarded to an Institutional Assessment Review Committee, Chaired by the Associate Dean, Academic Affairs. The committee shall investigate the case by means of a viva and/or a hearing of the parties concerned if required and shall take appropriate decision. The penalty that can be granted to a proven case of academic integrity violation which falls in this category of “other cases” can be a warning/component zero/ module fail/suspension/expulsion depending on the nature and gravity of the offence. 1.6. Types/Variations of cases of Plagiarism and associated actions Type 1: In case plagiarism is detected in any component or part submission (submitted at different times) of one assessment (assignment), the deduction in marks will be applicable for the whole assessment (assignment), even if only the component or part submission alone needs to be resubmitted. Type 2: In case plagiarism is detected in a group assessment, all students of the group will be considered as having committed an act of plagiarism irrespective of whether plagiarism is on account of the act of all or a few or only one member. The policy will then be applied to all students. Contractual Procedures and Estimation (CIVL 0026.1) – Fall – 20 – CW (Assignment 1) – A – QP MEC_AMO_TEM_035_02 Page 9 of 13 If some students in the group are eligible to re-submit (first offence) and others are not eligible, only eligible students will be allowed to re-submit within a period of one week and the penalty will be applied as per the policy for each student according to his / her history of violations. Type 3: Combination of Type 1 and Type 2: In case plagiarism is detected in any component or part submission (submitted at different times) of a group assessment (assignment), the deduction in marks will be applicable for the whole assessment (assignment), even if only the component or part submission alone needs to be resubmitted. All students of the group would be considered as having committed an act of plagiarism irrespective of whether plagiarism is on account of the act of all or a few or only one member. The policy will then be applied to all the students of the group. If some students in the group are eligible to re-submit (first offence) and others are not eligible, only eligible students will be allowed to re-submit within a period of one week and the penalty will be applied as per the policy for each student according to his / her history of violation. Type 4: Variation of Type 1 and Type 2: In cases where the assessment consists of components or part submissions that could be a group assessment component (e.g. group assignment) and an individual assessment component (e.g. individual reflection), the following will be applicable: a. If plagiarism is detected in the group assessment component, all students of the group will be considered as having committed an act of plagiarism, irrespective of whether plagiarism is on account of the act of all or a few or only one member. The policy will then be applied to all students of the group. In such cases the group assessment component will be resubmitted. If some students in the group are eligible to re-submit (first offence) and others are not eligible, only eligible students will be allowed to re-submit within a period of one week and the penalty will be applied for each student according to his / her history of violation. b. If plagiarism is detected in the individual assessment component, the individual assessment component will be resubmitted – if the student is eligible for resubmission-. The policy will then be applied to that student alone. c. In both cases (a) and/or (b), the deduction in marks will be applicable for the whole assessment (assignment). 1.7. Types/Variation of Cases of Multiple Offences If student is caught with multiple violations of same or different nature in different modules of the same semester, they will be considered as one offence and student will be penalized for each violation according to the type of the offence. If student is caught with multiple violations of same or different nature in the same module of the same semester, then they will be considered as different offences and each will Contractual Procedures and Estimation (CIVL 0026.1) – Fall – 20 – CW (Assignment 1) – A – QP MEC_AMO_TEM_035_02 Page 10 of 13 contribute to the overall count of AIV. The student then shall be penalized for each violation according to the count and type of each offence. * For further details Refer to MEC Student Academic Integrity Policy in Student Handbook. 2. Late Submission Regulations: It is the students’ responsibility to check all relevant timelines related to assessments. As per the Assessment Policy at MEC, late submissions are allowed for one week (5 working days) for all UG modules with a penalty. In such cases, a deduction of 5% of the marks obtained for the submitted work shall be imposed for each working day following the last date of submission till the date of actual submission. Assessment documents submitted beyond a period of one week (5 working days) after the last date of submission will not be accepted and will be awarded a zero for that assessment. In cases where the submission has been delayed due to extenuating circumstances, the student may be permitted to submit the work without imposing the late submission policy stated above. The extended period of submission will be one week from the original last date of submission. In such cases, the student is expected to submit the supporting certificates on or before the original last date of submission of the assessment and the decision of extension rests with faculty responsible for the assessment. The late submission policy shall be applied if the student fails to submit the work within one week of the original last date of submission. Students may contact their teachers for clarification on specific details of the submission time if required. 3. Research Ethics and Biosafety Policy To protect and respect the rights, dignity, health, safety, and privacy of research subjects involved including the welfare of animals and the integrity of environment, all student projects are expected to be undertaken as per the MEC Research Ethics and Biosafety Policy. Accordingly, the following shall apply.  Research and other enterprise activities shall be conducted by maintaining the high ethical standards consistent with national and international standards and conventions.  Any research at MEC that is categorized as high-risk research shall be subject to review and approval by the Research Ethics and Biosafety Committee.  Research activities involving collection of human or animal tissues and manipulation of microbial, animal or plant cells shall be subject to review and approval by the Research Ethics and Biosafety Committee.  Participants involved in research must be informed about the purpose of research and intended uses of research findings. Written consent must be obtained from people involved prior to the commencement of research. Contractual Procedures and Estimation (CIVL 0026.1) – Fall – 20 – CW (Assignment 1) – A – QP MEC_AMO_TEM_035_02 Page 11 of 13  Data obtained from participants must be treated with high confidence and should be used only for the intended purpose of research. Contractual Procedures and Estimation (CIVL 0026.1) – Fall – 20 – CW (Assignment 1) – A – QP MEC_AMO_TEM_035_02 Page 12 of 13 Marking Criteria – Proposal Student ID: ___________________ StudentName: ____________________________________ S.No Task (≥ 91%) Outsta nding (84-90%) Excellent (77-83%) Very Good (70-76%) Good (Acceptab le) (50-69%) Adequate/ Satisfactory (< 50%) Weak /Poor Marks Marks allotted 1 Aim of coursework 20 2 Coursework Description 60 3 Time Plan 20 Total 100 Penalty (if any) Final Marks 100 Scaled to 10% 10 Contractual Procedures and Estimation (CIVL 0026.1) – Fall – 20 – CW (Assignment 1) – A – QP MEC_AMO_TEM_035_02 Page 13 of 13 Marking Criteria – coursework Student ID: ___________________ StudentName: ____________________________________ No Task (≥ 91%) Outstandin g (84-90%) Excellent (77-83%) Very Good (70-76%) Good (Accepta ble) (50-69%) Adequate / Satisfact ory (< 50%) Weak /Poor Mark s Marks allotted 1 Structure of report 05 2 Introduction 10 3 Main body of report should cover  Principal method of choosing contractor with justification. 15  Tender process. 15  Tender document 10  e-tendering 10  Prime document. 20 4 Conclusions recommendations 10 5 References / Bibliography 05 Total Marks 100 Penalty if any Marks Scaled to 90.0 90 Proposal 10 Final Marks 100 100

Get professional assignment help cheaply

Are you busy and do not have time to handle your assignment? Are you scared that your paper will not make the grade? Do you have responsibilities that may hinder you from turning in your assignment on time? Are you tired and can barely handle your assignment? Are your grades inconsistent?

Whichever your reason may is, it is valid! You can get professional academic help from our service at affordable rates. We have a team of professional academic writers who can handle all your assignments.

Our essay writers are graduates with diplomas, bachelor, masters, Ph.D., and doctorate degrees in various subjects. The minimum requirement to be an essay writer with our essay writing service is to have a college diploma. When assigning your order, we match the paper subject with the area of specialization of the writer.

Why choose our academic writing service?

Plagiarism free papers
Timely delivery
Any deadline
Skilled, Experienced Native English Writers
Subject-relevant academic writer
Adherence to paper instructions
Ability to tackle bulk assignments
Reasonable prices
24/7 Customer Support
Get superb grades consistently

Get Professional Assignment Help Cheaply
Are you busy and do not have time to handle your assignment? Are you scared that your paper will not make the grade? Do you have responsibilities that may hinder you from turning in your assignment on time? Are you tired and can barely handle your assignment? Are your grades inconsistent?
Whichever your reason may is, it is valid! You can get professional academic help from our service at affordable rates. We have a team of professional academic writers who can handle all your assignments.
Our essay writers are graduates with diplomas, bachelor’s, masters, Ph.D., and doctorate degrees in various subjects. The minimum requirement to be an essay writer with our essay writing service is to have a college diploma. When assigning your order, we match the paper subject with the area of specialization of the writer.
Why Choose Our Academic Writing Service?

Plagiarism free papers
Timely delivery
Any deadline
Skilled, Experienced Native English Writers
Subject-relevant academic writer
Adherence to paper instructions
Ability to tackle bulk assignments
Reasonable prices
24/7 Customer Support
Get superb grades consistently

How It Works
1.      Place an order
You fill all the paper instructions in the order form. Make sure you include all the helpful materials so that our academic writers can deliver the perfect paper. It will also help to eliminate unnecessary revisions.
2.      Pay for the order
Proceed to pay for the paper so that it can be assigned to one of our expert academic writers. The paper subject is matched with the writer’s area of specialization.
3.      Track the progress
You communicate with the writer and know about the progress of the paper. The client can ask the writer for drafts of the paper. The client can upload extra material and include additional instructions from the lecturer. Receive a paper.
4.      Download the paper
The paper is sent to your email and uploaded to your personal account. You also get a plagiarism report attached to your paper.

 

PLACE THIS ORDER OR A SIMILAR ORDER WITH ASSIGNMENT WORKER TODAY AND GET AN AMAZING DISCOUNT

The post consultant company deals with inception to completion of the project appeared first on Essay fount.


What Students Are Saying About Us

.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐
"Honestly, I was afraid to send my paper to you, but you proved you are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"

.......... Customer ID: 11***| Rating: ⭐⭐⭐⭐⭐
"This company is the best there is. They saved me so many times, I cannot even keep count. Now I recommend it to all my friends, and none of them have complained about it. The writers here are excellent."


"Order a custom Paper on Similar Assignment at essayfount.com! No Plagiarism! Enjoy 20% Discount!"